The Eagle 1 runs on LTE Cat-M, the next-generation wireless network specifically adapted for use in machine-tomachine communications for telematics. The network offers higher coverage penetration, and lower power
consumption, at a lower cost than any other available network.
The Eagle 1 is a 100% cloud-managed device, running on Momentum’s cloud-based IoT management tools. This
means it is deployed without field-application engineering, while maintaining the highest security standards.
Momentum was built from the gravel up, by professionals, for professionals. We understand what you need in a
tracking solution because we’ve been there.
The Momentum Eagle 1 is backed by a lifetime replacement warranty.
Dimensions
3.6 in x 4.15 in x 1.4 in
Weight
6.91 ounces /196 grams / 0.43 lbs
Communications Mode
LTE Cat-M; Frequency bands: LTE: 2/4/12
SIM Access
Internal
Location Technology
A-GPS enhanced geo-location
Architecture
100% cloud-based decisioning, with firmware over-the-air updates on demand
Location
Accuracy 95% of reports within 1.5 meter accuracy
Security
End-to-end encrypted
Authentication
Unique digital signature per device
Compression
Industry-leading compression standards enable reduced airtime data usage, and sub 1 second time to fix from hot start
Mounting - The Eagle 1 offers two harness options
1. Plug-in OBD-II harness connects to diagnostic port. Suitable for: light to medium duty passenger vehicles, pickup trucks, and vans.
2. 12-Volt harness with pigtail. Suitable for direct-to-battery install on light equipment, big rigs, and heavy equipment. No diagnostics.
Environmental - IP 67 rated
Dust: Protected from total dust ingress Water: Protected from immersion between 15 centimeters and 1 meter in depth
Shock and Vibration - SAE J1455 standard
Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications
Bluetooth
Bluetooth Low Energy (BLE) 5 transceiver. Backward compatible to 4.0
Connectors
Rugged waterproof plastic, with standard OBD plug-in harness for behind dashboard installation
Temperature
22 to 170 Fahrenheit
Power - 12v DC
@5 mA in passive mode
@90 mA in transmit mode
@500 mA in max charging mode
OBD
100% cloud-based OBD interrogation
API
Open - RESTful and Webhooks
Network Schedule
LTE Cat-M is not subject to the upcoming 3G/ HSPA/GPRS sunsets affecting most major telematics providers
Tracking fuel consumption, managing off-duty use, and reducing idle times are just some ways fleet managers are reducing their fleet operating costs with GPS telematics.
Improve driver safety by setting alerts when vehicles are exceeding pre-determined speeds, or low on battery. You can monitor trucks pulling trailers to make sure they are driving safely. Check fuel levels.
Get techs to job sites on time. Set an alert to know when they arrive, and keep them on schedule. Automatically send a text or email to customers when a service vehicle has arrived at a job site.
Know where your trucks are, how they're doing, and where they're going. Manage your fleet at a glance. Group assets by location, asset type, or other custom criteria. Quickly find and sort by operating status, such as idled, parked, or moving.
Our rugged Eagle 1 device plugs in to most work trucks, and is available with modular OBD plug-in or 12-volt cables, so you can connect to multiple asset types.
Our Eagle 1 looks like a black box, with rugged exterior, on a cable which connects to your dashboard or battery.
Use our Eagle 1 GPS tracker to track company vehicles with ease. Simple install by a non-professional.
Install our Eagle 1 into the OBD or diagnostic port of your vehicle, or connect it direct to 12-volt battery.
We operate on a special bandwidth reserved for machine-to-machine communications. This gives us more coverage area, and stronger signal.
Our Eagle 1 is designed to be easy to install. Just plug it into a dashboard port, then zip tie the device under the dashboard. No professional required.
3G devices will not work when the carriers shut down the network. 4G devices will work for several more years.
Yes. We offer a 3rd wire cable for PowerSense tracking of PTO and aux equipment.
Test drive Momentum IoT’s award-winning fleet management apps from your browser or phone. Experience the power of telematics in seconds! Simulated connected assets enable you to see our GPS tracking application in action. Set up a monitor, get an alert. See mileage reports and trip histories. Play with it!
We'll ship you a GPS telematics device for a trial evaluation. There's zero risk – if Momentum isn't right for you can simply send the gear back.
Buy now with your credit card. We’ll ship via major carrier, and we’ll even pay for the shipping! Your business fleet will have GPS tracking in days.